|   |    Like Us on Facebook  Connect us on Google+
Slider Image Slider Image Slider Image Slider Image

Automotive

 
Garage & In-Plant Service
Tyre Pressures Gauge
Tyre pressure gauge is a handy device that enables maintenance of correct tyre pressure through regular check-ups. Recurring over-inflation and under-inflation are not only damaging but also dangerous. The variety of gauges available from Schrader makes it easy to fit the right gauge for every application Tyre Pressures Gauge
 
Enquire Now
   
Schrader 5566 Swivel-Foot Service Tyre Gauge
For large bore or Standard tyre valves. Has single swivel foot easily adjustable to straight push-on or right angled approach to valve. Calibrated 10-60 psi in 1 psi units, 60-160 psi in 5 psi units and 0.5-5 ksc in 0.10 ksc units, 5-12 ksc in 0.5 ksc units. Schrader 5566 Swivel-Foot Service Tyre Gauge
 
Enquire Now
   
ND 6297 LBH Large Bore Tyre Pressure Gauge
It has easy reading Bourdon tube type tyre pressure gauge. The gauge is provided with a rubber case. This has a rigid stem with a provision of the hand grip made up of Plastic. Single footing with a good nitrile rubber seal is mounted at one end of the stem. It is ideal for OTR tyres for quick reading at fields as well as tyre maintenance/repair shop. The provisions of the hose help access to the rear inner wheel valves. ND 6297 LBH Large Bore Tyre Pressure Gauge
 
Enquire Now
   
Schrader 8100T clip-on pencil type gauge
For light duty truck tyres. Identical to 7750T but calibrated 20-120 psi in 5psi units & 1.4-8.6 KSC in 0.4 KSC units.
 
Enquire Now
   
OTR Tyre O RING
Earthmoving equipments such as dump trucks, graders, wheel dozers, front end loaders and water sprinklers are equipped with various sizes of tubeless tyres. These tubeless tyres are inflated air pressure up to 120 psi. These tyres are mounted on five piece rim assembly on which there is a provision of o ring which helps retain the air pressure inside the tyre. The O ring is of static type, made out of good quality natural rubber and generally discarded once the tyre and rim is separated. Early failure of O ring leads to cumbersome job of removing the whole wheel, separating the rim and tyre and replacing the O ring, resulting in unproductive down time of the equipment. These O rings are designed for a minimum 350% of elongation at break and gives excellent resilience properties. Surface imperfections are checked as per IS 9975 part 2. The O rings are available in following sizes 18.00 X 25, 18.00 X 33, 21.00 X 35, 24.00 X 49, 30.00 X 51
 
Enquire Now
   
Schrader 7188BH All Service Dual Foot Type Gauge
Body of plated brass, has handy hang-up ring and six inch straight extension with angled dual foot to reach inner or outer tyre valve. Has flat indicating bar of plated brass calibrated 10-60 psi in 1 psi units. 60-160 psi in 5 psi units and 0.5-5 ksc units, 5-12 ksc in 0.5 ksc units used on heavy commercial vehicles
 
Enquire Now
   
Pencil type tire pressure gauge
Easy-to-read satin-finish metal indicating bar has deeply etched calibrations. Footing is specifically designed to fit valve right. Sturdy clip holds gauge firmly in pocket. Tapered end is handy deflator. Indicating bar is tough, durable, wear-resistant-has easy-to-read calibrations. Light weight metal lined molded-nylon footing absorbs shock, wont crack if gauge is dropped Tip end of indicating bar has handy deflator, spring clip keeps gauge in pocket. Pencil type tire pressure gauge
 
Enquire Now
   
Air Chucks
Schrader air chucks perfectly fit the world standard Schrader valve design. All practical operating conditions during the life of the chuck and the tyre valve have been taken into consideration in establishing the principle of design.The seating of the chuck washer on the valve mouth, and the engaging of the valve core plunger pin by the chuck deflator pin, provide an air-tight connection with high speed air flow. Air Chucks
 
Enquire Now
   
Part No.ND 650L-Hx (x=Length of The Hose)
Hose: The Hose is made of high temperature resistant thermoplastic with brass end fittings.The hose and the end fittings are crimpled perfectly,suitable to withstand pressure upto 15 Kg/Cm2.These can be given in various lengths depending on customer request. Part No.ND 650L-Hx (x=Length of The Hose)
 
Enquire Now
   
 

Automotive

Tyre Tube Valves
Valve Accessories
Valve Extensions
Garage & In-Plant Service
Tubeless Tyre Valves
 
Copyrights @ 2014 Schrader Duncan Limited  |  Email: info@schraderduncan.com Home  |  About us  |  Products  |  Investors  |  Careers  |  Faq  |  Sitemap  |  Contact us